Posted in

How much does it cost to drill a 100-foot well with a rig?

If you’re thinking about getting a 100-foot well drilled, one of the first questions popping up is almost always “how much is this gonna set me back?” And fair—well drilling isn’t like grabbing a coffee; it’s a big project, especially if you’re using a proper rig (not some sketchy DIY hand pump kit). As a guy who’s been selling water well drilling rigs for almost a decade, I’ve answered this question a hundred times, and I’m gonna break it down straight—no confusing jargon, no hidden fees I can’t stand, just the real numbers and what actually drives the cost. Water Well Drilling Rig

First off, let’s get one thing clear: a “100-foot well” isn’t just a hole in the ground. There’s way more that goes into it. For starters, the rig itself matters—and that’s where I come in. We don’t sell those tiny, flimsy rigs that can only handle soft, sandy soil and will break halfway through drilling. Our rigs are built for reliable work, whether you’re drilling residential wells, small agricultural supply, or even for livestock water troughs. That base rig cost is a big piece of the puzzle, but it’s not the only one.

Let’s start with the drilling phase itself. I’ve seen folks assume drilling 100 feet is straightforward, but soil type changes everything. If you’re in an area with soft clay or sand, drilling goes fast—maybe 1 to 2 feet an hour. But if you hit rock? Oh man, that slows way down. Hard granite or compacted shale can take 4 to 6 feet an hour, sometimes more. So for a 100-foot well, that drilling time alone can swing from 50 hours (soft soil) to 200 hours (rocky ground). And time is money for drilling crews, right? They’re not gonna charge you just to watch—each hour of rig operation, labor, and fuel adds up.

Then there’s the casing. Casing is the pipe you drop down the well to keep the hole from collapsing, keeping dirt and bacteria out of your water. For a 100-foot well, you need a full 100 feet of casing, usually either PVC (cheaper, common for residential) or steel (tougher, good for rougher ground). PVC casing for a 4-inch diameter (standard for homes) runs about $1.50 to $3 per foot, so that’s $150 to $300 right there. Steel is more, around $3 to $6 per foot, so $300 to $600. A lot of drillers will also add a well screen at the bottom—this is the part that lets water seep in while keeping sediment out. Screens cost another $50 to $150, depending on size.

Next, we have to talk about permits and site prep. Most places require a building or water well permit to drill—costs vary by county, but it’s usually $100 to $500. Then there’s clearing the site: you need a spot big enough for the rig to fit, usually at least 10×10 feet, no big trees or rocks in the way. If your yard is super sloped, or you’ve got a septic tank buried nearby, you might need to move stuff or get a survey—add another $100 to $400 here. Don’t forget transport: if the drilling crew has to haul their rig 50 miles to your property, that’s a mileage fee, usually $2 to $3 per mile, so that’s $100 to $150 right there for a short trip.

Wait, let’s put some actual numbers to this so you can wrap your head around it. Let’s do two scenarios, both for a 100-foot residential well, since that’s what most folks are asking about.

First scenario: Soft, sandy soil, no rock hits, flat yard, local permit, crew doesn’t have to travel far. Drilling time here is roughly 60 hours (1.6 feet per hour). Labor and rig operation for that time is about $25 to $50 an hour depending on your region—let’s take the midpoint, $37.50. So that’s 60 hours x $37.50 = $2,250. Casing: 4-inch PVC, 100 feet, plus screen—let’s say $225 total. Permits and site prep: $300. Transport: $125. Add that up: $2,250 + $225 + $300 + $125 = $2,900. That’s the low end for a 100-foot well, no frills, works great for most small homes or cabin water.

Second scenario: Rocky ground, you hit 20 feet of solid granite halfway through, so drilling time doubles to 120 hours. Labor and rig ops are still $37.50 an hour, so 120 x $37.50 = $4,500. Casing might need thicker PVC or even a section of steel because the rock is rough, so that’s $350. Permits and site prep might be a little more if you had to clear bigger rocks: $400. Transport is same at $125. Add that up: $4,500 + $350 + $400 + $125 = $5,375. That’s the high end for a basic residential 100-foot well, no extras like a pump or pressure tank (wait, right, I almost forgot—pumps are separate, usually $500 to $1,500, but that’s post-drilling, not part of the well hole itself).

Now, since I’m a water well drilling rig supplier, I get asked all the time: “What rig should I use if I wanna drill my own 100-foot well?” Look, I don’t sell to beginners who’ve never run heavy equipment—don’t do that, it’s dangerous, you can mess up the well, even hurt yourself. But if you’re a experienced operator, maybe a farmer with some machinery skills, you can get a portable, compact drilling rig that’s made for 100-foot wells. Our entry-level portable rigs for shallow wells (up to 150 feet) cost around $12,000 to $18,000. For a bit more, like $18,000 to $25,000, you get a little more power to handle minor rock, which saves you time when you’re drilling. The big thing with a rig is—cheaper rigs might seem like a deal, but they break down easy, which means more downtime, more repairs, and you’ll waste way more money in the long run. We stand behind our rigs, offer training for operators, and have parts shipped fast if something goes wrong, so that peace of mind is worth the extra few grand.

Wait, let’s talk about common mistakes people make that mess up these costs. First, not checking the soil in their area. You can call your county’s extension office or a local well driller to get a soil map—if you live in an area known for limestone or hard rock, you shouldn’t budget $3k, you need to budget $5k+. Second, skipping permits. A lot of folks think “no one will notice” but if you ever sell your house, the well has to be permitted, and if it’s not, you could get fined thousands of dollars, or the appraisal will tank. Third, not thinking about the rig’s weight. If your yard is really soft, like after a rain, a big drilling rig might get stuck, and you’ll have to pay extra to get it towed out. That’s a silly cost, but it happens all the time.

Another thing: water yield. A 100-foot well doesn’t always mean you get the water you need. If you drill 100 feet and hit only a trickle, you might have to go deeper, which adds more cost. That’s why it’s smart to get a local hydrology check before you start—they can tell you where the water table is, how deep you’ll need to go, so you don’t end up with a useless hole. We work with a lot of drillers who skip that step and regret it, so that’s a tip I always pass along.

Let me make sure I’m not leaving anything out. What about residential vs. commercial? A 100-foot well for a small hobby farm or a tiny cabin is way cheaper than a well for a commercial farm with multiple livestock troughs, or a small community. Commercial wells might need bigger casing, more powerful rigs, and they have to meet stricter health codes, so those costs go up even more—often $7,000 to $10,000 for a 100-foot commercial well, sometimes more if it’s in a remote area.

And for those who are wondering if they can save money by DIY-ing the whole thing? Let’s be real. I’ve seen folks try to rent a small rig for a day, only to take three days just to drill 50 feet, break the drill bit twice, and have to hire a pro to fix it. Renting a rig for a 100-foot well would run you about $300 to $500 a day, so if it takes 3 days, that’s $900 to $1,500, plus you still have to pay for casing, permits, and all that. And if you mess up the well, you’re out the rental money and have to drill it again. It’s almost never worth it for a non-pro.

Now, if you’re looking to get into the well drilling business yourself, or if you’re a driller looking to upgrade your rig to cut down on time and costs, that’s where we come in. Our rigs are designed for shallow to medium wells, super reliable, easy to transport, and built to handle whatever soil you throw at them. We’ve helped hundreds of drillers go from relying on cheap, finicky rigs to ones that finish jobs faster, have less downtime, and make more profit.

I know this is a lot of info, but the big takeaway is: a 100-foot well costs between $2,500 and $6,000 for a residential job, depending on soil, location, and extras. If you’re looking to buy a rig for your own drilling projects, we can walk you through what size and power you need, no sales pitch just to get a sale. If you’re a driller looking to upgrade, we’ve got options for every budget.

If you’re ready to chat through your specific project, whether you’re a homeowner looking for pricing, or someone looking to buy a water well drilling rig, feel free to reach out to us to discuss details, ask questions, and get a customized estimate. No pressure, just real answers.

Pile Driver References:

  1. National Ground Water Association. (2023). Residential Water Well Cost Guide.
  2. U.S. Environmental Protection Agency. (2022). Small Water System Drilling Requirements.
  3. Drilling Contractor Magazine. (2023). Shallow Well Rig Performance Analysis.
  4. County Extension Service, [Local County Data]. (2024). Soil and Water Table Reports for Water Well Projects.

Quzhou Ontop Machinery Co., Ltd.
Quzhou Ontop Machinery Co., Ltd. is one of the most experienced water well drilling rig manufacturers and suppliers in China, also supports custom service. We warmly welcome you to wholesale durable water well drilling rig made in China here from our factory. Contact us for more cheap products.
Address: Youdaoyuan, Jiangjiashan Town, Kecheng District, Quzhou City, Zhejiang Province, China
E-mail: info@ontopmachinery.com
WebSite: https://www.ontopmachinery.com/