Posted in

Are LPR cameras waterproof?

When I first started selling LPR (License Plate Recognition) cameras back in 2012, I’d get the same question at every trade show, every client call, every time I walked a new property manager through our product line: “Will these cameras hold up if they’re outside in the rain?” Back then, our early LPR models were fine for covered parking garages or office building entrances with overhangs—add a little moisture, and the lenses would fog, circuit boards would corrode, and we’d be back at square one replacing units. Over the last 11 years, though, waterproofing for LPR cameras has evolved from a afterthought to a non-negotiable spec for almost every customer we work with, and I’ve learned way more about what makes these cameras truly weatherproof than I ever expected to back when we were still building prototypes in my garage. LPR Camera

Let’s cut through the marketing jargon first. A lot of brands slap an “IP65” sticker on their cameras and call them waterproof, but that’s not enough if you’re installing them on a street pole or a driveway that gets pounded by heavy rain, snow, or even salt spray from winter roads. IP ratings (Ingress Protection) are standardized by the International Electrotechnical Commission, so I always tell customers to look past the number and understand what each level actually means. For LPR cameras, the sweet spot is at minimum IP66, but IP67 or IP68 is where you want to be if you’re working in environments with extreme weather.

I’ve had customers come to me saying they bought a cheaper IP65 LPR camera online, installed it last winter, and now half of them are dead because they’re in a region that gets 30+ inches of annual rain. Here’s why that happens: IP65 means the camera is protected against low-pressure water jets from any direction, and dust can’t get inside. But it doesn’t test for immersion, or for heavy, prolonged rainstorms. A big thunderstorm with 2 inches of rain in an hour? That’s way more pressure than a standard IP65 test, and water will seep through gaps that the manufacturer didn’t seal properly. Early on, I tried selling our first IP65 model to a car dealership client, and they called me three weeks later saying 12 units had failed. I drove out there, climbed up the pole, and saw that the camera housing had a tiny gap around the lens mount—water was getting in, and by the end of a hot, humid summer, it had shorted out the circuit board. That mistake cost us that client for a while, but it taught me exactly where to focus when improving our waterproofing.

So what makes a good LPR camera waterproof? It’s not just slathering silicone around all the parts (though that’s a part of it, done right). First, the housing material matters. A lot of cheaper cameras use thin plastic housings that warp in extreme heat or cold—when that happens, the seals break, and water gets in. Our cameras use die-cast aluminum housings, coated with a powder finish that resists rust, salt, and UV rays. I’ve tested these housings by leaving a unit submerged in a 5-gallon bucket of water for 72 hours straight, then hosing it down with a high-pressure washer at 1,000 PSI (which is way higher than any standard rain or even car wash) and running a full LPR test afterward. No fog, no corrosion, no dropped frames—works like it’s brand new.

Next, the lens seal is non-negotiable. LPR cameras need a clear lens to read license plates from 50+ feet away in any weather, so fog on the inside of the housing is a death sentence for accuracy. A lot of manufacturers use rubber gaskets, but those break down over time in extreme temperatures. We switched to EPDM gaskings, which are resistant to both cold (down to -40°F) and heat (up to 185°F)—no cracking, no shrinking, no gaps. We also add a desiccant packet inside the housing when we assemble each camera, which absorbs any moisture that might get trapped during manufacturing. I’ve heard horror stories from other integrators where a camera worked for a week, then fogged up because the desiccant was missing or insufficient. That’s a easy fix, but only if you’re building the camera right from the start.

Then there’s the wiring. LPR cameras have to connect to power and network cables, and those entry points are where most water leaks happen. Cheaper cameras use standard cable glands that don’t create a tight seal around the cable—water will run down the cable and into the housing. We use waterproof cable glands with a rubber boot that fits tightly around the cable, no matter the size, and we also seal the junction box where the cables enter the camera housing with silicone sealant that’s rated for outdoor use. On top of that, we recommend using weatherproof conduit for the cables when installing, especially in areas that flood or get heavy snowmelt. I always tell customers to budget for the conduit—it’s a small extra cost that saves them from having to replace their cameras a year later.

I’ve also learned that waterproofing isn’t a one-size-fits-all. A camera installed in a covered parking garage only needs IP65, because it’s never exposed to direct rain. But a camera on a busy highway interchange? That needs IP67 or IP68, because it’s exposed to constant rain, snow, and salt from road treatments. Last year, we installed IP68 LPR cameras for a municipal parking garage in Buffalo, NY, which gets 90+ inches of snow a year. They’ve been up for two winters now, and only one unit had a minor issue—and that was because an installer nicked the conduit while running the cable, not because of a flaw in the camera itself.

Common myths I hear all the time: “If it’s waterproof, I can leave it submerged forever.” No, that’s what IP68 is rated for—usually up to 1.5 meters of immersion for 30 minutes, but it’s not designed for permanent submersion. Another one: “Cold weather will break a waterproof camera.” Nope, as long as the seals and housing are rated for low temperatures, they work just as well in -20°F as they do in 90°F. We did a test last month where we put a new LPR camera in a walk-in freezer set to -30°F, left it for 48 hours, then brought it back to room temperature and ran license plate tests. It was just as accurate as a brand new unit from the production line.

As a supplier, I also stand behind our waterproof cameras because I test every single one before it leaves our warehouse. We don’t just check the IP rating on the spec sheet—each unit goes through a 24-hour water test: we spray it with a high-pressure water nozzle, submerge it in a bucket, and run a diagnostic test to make sure the circuits are working. No exceptions. I learned early on that cutting corners on testing leads to unhappy customers, and unhappy customers don’t come back. We have a 5-year warranty on all our waterproof LPR cameras, too—if something goes wrong because of a manufacturing defect, we’ll replace it for free, no questions asked.

Now, if you’re in the market for LPR cameras, here’s what I recommend you look for. First, confirm the IP rating, but don’t stop at the number. Ask the supplier for test data: how was the IP rating tested? Did they test for extreme temperatures? What’s the warranty like? Second, ask about the housing material and gaskets—aluminum housings and EPDM gaskets are non-negotiable for outdoor use. Third, ask about the wiring and cable seals—cheap cable glands are one of the most common causes of water damage. Finally, don’t be afraid to ask for references. We always give out references from customers in similar environments—municipalities, car dealerships, parking garages, highways—because nothing tells you a product works like hearing from someone who’s been using it for years.

I see too many customers waste money on cheap LPR cameras that claim to be waterproof, only to have to replace them six months later. Over the last decade, we’ve built hundreds of thousands of waterproof LPR cameras, and I can count on one hand the number of units that have failed because of our own manufacturing mistakes. That’s not luck—it’s attention to detail, and knowing that when a customer installs our camera, it needs to work in every weather condition, every day, no matter what.

If you’re planning an LPR installation, whether it’s for a small residential driveway, a busy commercial parking lot, or a highway interchange, let’s talk. I can walk you through the specs, show you test data, and even connect you to references in your area who use our cameras. We don’t just sell cameras—we sell solutions that work, and that means making sure every unit is waterproof enough to last for years, no matter the environment. There’s no substitute for on-the-ground testing, and I’ve done enough of that to know that when a customer picks our waterproof LPR cameras, they don’t have to worry about rain, snow, or anything else the weather throws their way.

Pay-on-Foot Station References

  1. International Electrotechnical Commission. (2021). IEC 60529: Degrees of protection provided by enclosures (IP Code)
  2. National Electrical Manufacturers Association. (2020). NEMA 250: Enclosures for Electrical Equipment
  3. Journal of Sensors and Sensor Systems. (2022). Environmental Durability Testing for Outdoor Intelligent Traffic Systems

Wiicontrol Information Technology Co., Ltd.
Wiicontrol Information Technology Co., Ltd. is one of the leading manufacturers and suppliers focusing on lpr camera in China. Find and buy the high-tech, quality and cheap lpr camera here with our factory. Custom products are also available based on qualified customized orders. Feel free to get the quote with us now.
Address: #G1-406, 200 Linghu Blv, Xinwu District, Wuxi City, China. 214135
E-mail: tina.guo@wiicontech.com
WebSite: https://www.wiiparking.com/