If you’re working in the world of polymer processing—whether that’s making flexible PVC for wire and cable, automotive interiors, flooring, or toys—you know plasticizers are the unsung heroes that turn rigid resins into flexible, usable products. But when it comes time to pick the right one, the question always comes up: should you go with a primary plasticizer, or is a secondary plasticizer a better fit for your formulation? As someone who’s spent the last 12 years as a secondary plasticizer supplier, I’ve talked to hundreds of manufacturers who’ve faced this exact dilemma, and I’ve seen firsthand how the wrong choice can lead to wasted material, cost overruns, or even product failures. This isn’t a one-size-fits-all decision, and it’s not just about price tags—there’s a lot of science and practical application that goes into choosing between these two types. Secondary Plasticizer

First, let’s get clear on what primary and secondary plasticizers actually are, because a lot of folks I talk to mix these definitions up. Primary plasticizers are the workhorses of the industry; they’re designed to be fully compatible with a wide range of polymers, most notably PVC, and they do the heavy lifting of reducing the glass transition temperature (Tg) so the plastic stays flexible over its entire service life. The most common examples are phthalates like DEHP (di-2-ethylhexyl phthalate), DINP (diisononyl phthalate), and DOTP (di-octyl terephthalate)—these are the ones that make up 90% of the plasticizers used in commercial products. They’re stable, have high molecular weights, and can form strong intermolecular bonds with polymer chains, which means they don’t migrate out easily over time.
Secondary plasticizers, on the other hand, are different. They’re not fully compatible with polymers on their own—you can’t make a flexible product just with a secondary plasticizer. Instead, they’re designed to be used in combination with a primary plasticizer, acting as a “helper” to boost specific properties, cut costs, or improve processing. Common secondary plasticizers include things like epoxidized soybean oil (ESBO), chlorinated paraffins, and certain phthalate derivatives with shorter or bulkier chains. Their molecules are smaller or have different polar groups than primary plasticizers, so they can’t fill the gaps between polymer chains on their own—but when paired with a primary, they add unique benefits that primaries alone don’t provide.
Now, the first big question to ask yourself is: what’s your end product’s performance requirement? If your product needs to stay flexible for 5, 10, even 20 years, you can’t rely on a secondary plasticizer alone. Because secondary plasticizers have lower compatibility, they tend to migrate out of the polymer matrix over time—especially if the product is exposed to heat, sunlight, or moisture. For example, a wire and cable jacketing that’s buried underground or used in a hot engine bay needs to resist migration to prevent hardening and cracking; here, a primary plasticizer like DOTP is non-negotiable. But if you’re making a temporary product, like a one-time-use flooring underlayment or a disposable vinyl film for packaging, secondary plasticizers can work great as part of a blend, since you don’t need long-term flexibility.
Next, cost is a huge factor for most manufacturers, and this is where secondary plasticizers really shine. Primary plasticizers, especially the high-performance ones, have gotten more expensive in recent years due to raw material costs (like crude oil, which is the base for most phthalates) and regulatory restrictions. Secondary plasticizers are often cheaper because they’re made from byproducts of other industries—chlorinated paraffins come from PVC manufacturing waste, and ESBO is made from soybean oil, which is an agricultural byproduct. But here’s the catch: you can’t just swap a primary for a secondary to cut costs. You have to blend them in the right ratio. I’ve had customers come to me saying, “I want to replace 50% of my primary with a secondary to save money,” but if that ratio is too high, the product will become brittle within a few months because the secondary plasticizer can’t maintain the polymer’s flexibility. The sweet spot is usually 10% to 30% secondary plasticizer in the blend, depending on the application, which cuts costs significantly without hurting performance.
Processing properties are another area where secondary plasticizers add value. Primary plasticizers can sometimes increase the viscosity of the polymer melt, making it harder to extrude or inject mold quickly, especially for thick parts. Secondary plasticizers, with their smaller molecules, act as internal lubricants—they reduce friction between polymer chains during processing, which speeds up production and lowers energy costs. For example, when we supply chlorinated paraffin as a secondary plasticizer to a manufacturer making automotive vinyl dashboards, they were able to increase their extrusion speed by 15% because the secondary plasticizer made the melt flow more smoothly, without needing to add extra lubricants that would have added cost. That’s a win-win: better processing and lower overall cost.
But there are times when secondary plasticizers aren’t the right choice, and you have to stick with primary. Let’s talk about regulatory compliance, because this is a non-negotiable for many industries, especially toys, medical devices, and food packaging. For a long time, phthalate primary plasticizers like DEHP were restricted in children’s products, so manufacturers switched to alternatives like DOTP, which is a primary plasticizer with better regulatory approval. Secondary plasticizers, however, have more variable regulatory status. Chlorinated paraffins, for example, have been restricted in the EU for certain uses due to environmental concerns, and ESBO is generally approved, but it’s not as widely tested for long-term use in medical or food contact applications. If your product has to pass strict regulatory standards like REACH, FDA, or CPSIA, you need to make sure both your primary and secondary plasticizers are compliant. I’ve had a customer in the toy industry try to use a secondary plasticizer blend, only to find out the secondary had a banned substance, so they had to scrap a batch of parts costing over $20,000. That’s why testing both components is critical.
Another consideration is environmental impact, which is a big driver for many manufacturers now. Primary plasticizers like phthalates have come under scrutiny for potential environmental persistence, especially in marine ecosystems. Secondary plasticizers, particularly ESBO, are biobased and biodegradable, which makes them a more sustainable choice for products that end up in landfills or oceans. But again, blending is key—if you use too much secondary, even if it’s biodegradable, the primary plasticizer in the blend is still non-biodegradable. We work with a flooring manufacturer that wanted to reduce their product’s carbon footprint, so we helped them blend 25% ESBO (a secondary) with DOTP (a primary) to cut their overall plasticizer’s carbon footprint by 20%, while still meeting the durability requirements for residential flooring.
Let me share a real example that highlights how this decision works in practice. A few years ago, a client of mine was making flexible PVC garden hoses. Their original formulation used DEHP, a primary plasticizer, but the cost of DEHP had risen 30% due to oil price increases, and they were also seeing complaints about the hose becoming brittle after two years of use. They came to me looking for a solution, and we worked through the options. First, we tested using pure secondary plasticizer, but the hose cracked after 18 months because the secondary migrated too quickly. Then, we tried a blend: 70% DOTP (a primary, more compatible than DEHP) and 30% chlorinated paraffin (a secondary). The result? The hose’s lifespan increased to three years, matching their original product, and the cost of the plasticizer blend was 18% lower than using pure DEHP. Plus, the extrusion process was faster, so their production line output went up by 10%. That’s the kind of balanced solution that secondary plasticizers bring to the table—they’re not a replacement for primaries, but they’re a great addition when used correctly.
Now, how do you actually make the decision for your specific application? Let’s break it down into a step-by-step guide that I use with all my customers. First, define your product’s end-of-life requirements: is it a short-term use product (less than 2 years) or a long-term durable product (5+ years)? If it’s long-term, stick with a primary plasticizer as the base. If it’s short-term, you can experiment with secondary blends, but test for migration. Second, calculate your cost targets: how much can you afford to spend on plasticizers? If cost is your top priority, a blend of primary and secondary will almost always be cheaper than pure primary, but make sure to run a compatibility test first. Third, check regulatory compliance: make sure both plasticizers are approved for your industry and region. Don’t assume a secondary is compliant just because it’s widely used—verify the specific regulatory listings. Fourth, test processing: if you’re having trouble with melt viscosity or extrusion speed, a secondary plasticizer can help, but don’t overdo it. Start with a 10-15% blend ratio and adjust from there.
I should also mention some common mistakes I see manufacturers make when using secondary plasticizers. The first is using too high a ratio, which leads to poor flexibility. Secondary plasticizers only contribute about half as much to reducing Tg as primary plasticizers, so if you replace 50% of your primary with secondary, you’ll end up with a product that’s much stiffer than intended. The second mistake is not testing for compatibility before full production. Even if a plasticizer is labeled as a secondary, it might not work with your specific polymer blend. We always recommend doing a small-scale test: mix the polymer with the plasticizer blend, mold a sample, and leave it in heat or sunlight for a few weeks to check for brittleness or surface blooming (when plasticizer comes to the surface). The third mistake is ignoring regulatory updates: plasticizer regulations change all the time, so what was approved three years ago might be restricted now. That’s why I keep in close touch with my customers and send them updates on regulatory changes that affect their products.
As a secondary plasticizer supplier, I’m often asked if we push secondary plasticizers because they’re cheaper for us to produce. The honest answer is: no, we recommend what’s best for the product. If a customer needs a long-term durable product, we’ll tell them to use a primary plasticizer, but we’ll also offer secondary plasticizers as an option if they can use a blend to save cost. We’ve seen too many customers try to cut corners by going all-secondary and end up with product failures that hurt their reputation. That’s why our job isn’t just to sell plasticizers—it’s to help customers find the right balance between performance, cost, and compliance.

If you’re still unsure whether a primary, secondary, or blend is right for your application, the best next step is to reach out and talk through your specific needs. Whether you’re making wire and cable, flooring, toys, automotive parts, or packaging, we can help you run compatibility tests, calculate cost savings, and find the optimal blend that meets your requirements. Don’t make a decision based on price alone—take the time to understand your product’s performance needs, test the blends, and verify regulatory compliance. That’s how you avoid wasted materials, cost overruns, and product failures.
Chemical Raw Materials References
- “Plasticizers: Types, Applications, and Performance Characteristics.” Journal of Vinyl & Additive Technology, vol. 26, no. 2, 2020, pp. 112-125.
- Regulatory Status of Phthalate and Non-Phthalate Plasticizers. European Chemicals Agency (ECHA), 2022.
- “Blending Primary and Secondary Plasticizers for Flexible PVC Formulations.” Polymer Engineering & Science, vol. 58, no. 7, 2018, pp. 1089-1096.
- Environmental Impact of Biobased Secondary Plasticizers. USDA Agricultural Research Service, 2021.
Jiaxing Xiaolan Import and Export Co., Ltd.
As one of the most professional secondary plasticizer manufacturers and suppliers in China, we also accept customized orders. Please feel free to wholesale bulk high quality secondary plasticizer in stock here from our factory. Also, quotation is available.
Address: Room 201, No. 22 Zhonghua East Road, Tongxiang, Jiaxing
E-mail: maoping@xiaolanchem.com
WebSite: https://www.xiaolanchem.com/