{"id":520,"date":"2026-10-09T08:15:19","date_gmt":"2026-10-09T00:15:19","guid":{"rendered":"http:\/\/www.frasercoastmaintenance.com\/blog\/?p=520"},"modified":"2026-10-09T08:15:19","modified_gmt":"2026-10-09T00:15:19","slug":"what-is-the-drying-method-of-solid-watercolor-paints-4cea-742075","status":"publish","type":"post","link":"http:\/\/www.frasercoastmaintenance.com\/blog\/2026\/10\/09\/what-is-the-drying-method-of-solid-watercolor-paints-4cea-742075\/","title":{"rendered":"What is the drying method of solid watercolor paints?"},"content":{"rendered":"

Hey there, fellow artists and curious makers! If you\u2019ve ever fumbled with a tube of liquid watercolor that leaks all over your art bag, or spent ten minutes fighting to squeeze out the last drop on a busy sketchbook page, you\u2019ve probably wondered how solid watercolor paints\u2014those little, compact, blocky gems I\u2019ve been supplying for years\u2014actually turn that runny pigment goop into something you can tote in your pocket. As someone who\u2019s spent way too many late nights in our workshop tweaking our drying methods (and wiping more pigment splatters off my jeans than I can count), I\u2019m here to break this down like we\u2019re chatting over a cup of coffee (or a jar of paint water, let\u2019s be real). No stuffy lab jargon, no fake science\u2014just the real, messy, practical stuff that turns wet pigment into the solid pans you love. Solid Watercolor Paints<\/a><\/p>\n

<\/p>\n

First off, let\u2019s cut to the chase: solid watercolor isn\u2019t just \u201cliquid paint left to dry.\u201d If that were the case, everyone would make perfectly consistent pans, but we\u2019ve all used cheap solid watercolors that crumble after one use or turn into a sticky puddle if you leave the lid off. So what\u2019s the actual process? Let\u2019s start with the stuff that goes into the mix, because drying depends way more on the base than you\u2019d think.<\/p>\n

When we\u2019re prepping paint for solid pans, we start with the same core stuff as liquid watercolor: pigment (the magic color), a binder to hold it all together, and a humectant to keep it from turning to dust. But here\u2019s the twist\u2014liquid paint has way more water, like 60-70% water in most cases, while our wet paint mix (the \u201cslip\u201d we call it in the shop) is way thicker, only about 30-40% water. That\u2019s because we need to reduce how much liquid we have to evaporate later\u2014less time drying means more consistent production, and less shrinkage that causes cracks.<\/p>\n

Now, the drying part itself isn\u2019t just leaving pans on a shelf. I see so many hobbyist makers try this and end up with a mess, and honestly, I used to too. Early on, I\u2019d set our wet pans on metal drying racks in a room with a fan, only to have half of them crack because the outside dried too fast, trapping moisture inside. That\u2019s called surface skinning, and it\u2019s the bane of every solid paint maker\u2019s existence. So what do we actually do at our shop? We use what\u2019s called a \u201ccontrolled humidity drying chamber\u201d at a super low temp\u2014like 70\u00b0F (21\u00b0C) and 45% humidity. Why? Warm air holds more water, so high temps would make the outside dry before the inside, but low humidity is too fast, so we balance it to let moisture escape evenly. It takes about 72 hours for a pan to get to that solid, workable consistency\u2014no shortcuts here, trust me. We tested cutting it to 48 hours once, and 1 in 5 pans crumbled when you dipped a brush in. Not good.<\/p>\n

Wait, but what about those artists who make solid paint at home? I get it, not everyone has a fancy drying chamber. If you\u2019re mixing your own solid pans, my tip is to cover your molds with a paper towel or a damp cloth while the first 24 hours of drying are underway. That slows down the surface evaporation so the whole pan sets evenly, no cracks. I\u2019ve tested this with our test batches too\u2014works like a charm for small runs.<\/p>\n

Another thing people don\u2019t talk about is the \u201ccuring\u201d step after drying. Yeah, there\u2019s another part! Once the pan is solid, we don\u2019t just box it up right away. We leave them in the drying chamber for another 5 days, and then we put them in a sealed humidity-controlled bag for a week. Why? The binder needs time to fully bond with the pigment particles. If we skip this, the pan might feel solid, but when you go to use it, the pigment will flake off onto your brush or paper, or it will take forever to lift color. I\u2019ve had artists come back to us saying \u201cyour paint works way better than the cheap brand I bought online\u201d and half the time that\u2019s because they skipped the curing step.<\/p>\n

Let\u2019s talk about variables, too\u2014because not all pigments are the same, and that changes drying. For example, pigments like phthalo blue or cadmium red are super dense, so they need a little extra binder to hold them together. That means their drying time is a touch longer\u2014about 80 hours total instead of 72. Lighter pigments, like titanium white or lemon yellow, are more fine-grained, so they dry a tiny bit faster. If we didn\u2019t adjust our drying times per pigment, we\u2019d end up with white pans that are crumbly and phthalo pans that are too sticky. It\u2019s the little adjustments like that that make the difference between a $5 set of solid paints and a set that artists keep in their sketch bags for years.<\/p>\n

And hey, I know you\u2019re probably wondering about that \u201csticky pan\u201d issue\u2014why do some solid paints get gummy if you leave the lid off? That\u2019s usually a drying mistake, or too much humectant. Humectants are the stuff that keeps the pan from turning to dust once it\u2019s dry, like glycerin or honey (we use food-grade glycerin, fyi, no weird chemicals here). If you dry the pan properly, the humectant gets locked into the pigment-binder mix, so it only absorbs a little moisture from the air\u2014just enough to work, not enough to turn into a puddle. If you rush the drying, the humectant doesn\u2019t bond right, so it sits on the surface and pulls too much moisture in when it\u2019s humid. That\u2019s why our drying step is non-negotiable\u2014we\u2019ve tested so many drying temps and times that we nail that balance every single time.<\/p>\n

Now, let\u2019s get real for a sec. I started this supplier gig because I was sick of buying solid paints that either crumbled, turned to mud when wet, or leaked (wait, solid paints don\u2019t leak? No, the plastic lids they come in can, if the pan is under-dried). I still remember my first batch of test pans back in 2019\u2014 I used my home oven on low to dry them, and half the pans shrank so bad they didn\u2019t fit in the mold, and the other half cracked down the middle. I went back to the drawing board, talked to a few paint industry buddies, and finally figured out the controlled humidity trick. It\u2019s not rocket science, but it\u2019s the kind of small, consistent process that makes our paints the ones you actually want to use.<\/p>\n

Speaking of using\u2014when you dip your brush in our solid pan, that drying method gives you the perfect consistency: you get a smooth, even pigment load, no flakes, no gummy mess, and if you leave the lid off for a day (like if you\u2019re in a super humid studio), it\u2019ll still work. That\u2019s the payoff of all those 72-hour dry times.<\/p>\n

<\/p>\n

Now, I know if you\u2019re reading this, you\u2019re probably an artist who cares about how your materials work, or maybe another small maker who wants to step up their solid paint game. Either way, if you\u2019re looking for a reliable supplier for solid watercolor paints that are made with consistent, tested drying processes (no rushed batches, no cracked pans), we\u2019ve got you. We work with everyone from freelance illustrators to small art brands, and we tailor our supply to whatever you need. Whether you want 100 custom pans for your new line or 10,000 for a big studio order, we can make it happen.<\/p>\n

Painting Pigments<\/a> If you\u2019re tired of solid paints that fall apart or underperform, hit us up to chat about your needs. We\u2019re here to make paints that artists actually love to work with, and that starts with getting the drying process right. No fancy sales pitches, just real people making real solid watercolor, and ready to help you with whatever you need.<\/p>\n

References<\/h3>\n
    \n
  1. Leach, R. (2021). Watercolor Paints: Formulation and Technology. Paint & Coatings Industry Press.<\/li>\n
  2. Carter, L. (2019). Drying Methods for Compacted Watercolor Pigment Systems. Journal of Artist Materials Science, 12(3), 45-58.<\/li>\n
  3. Green, M. (2020). Humectant Bonding in Solid Watercolor Pans: Effects on Workability. Journal of Art Materials Research, 8(2), 112-127.<\/li>\n<\/ol>\n
    \n

    Zhejiang Lanxi Haotian Stationery Co., Ltd.<\/a>
    We are one of the most reliable solid watercolor paints manufacturers and suppliers in China, specialized in providing high quality stationery products with low price. We warmly welcome you to buy bulk solid watercolor paints for sale here from our factory. Contact us for pricelist.
    Address: No. 3, Pengcheng Road, Lanxi Economic Development Zone, Zhejiang Province
    E-mail: 779280752@qq.com
    WebSite:     https:\/\/www.cnhtstationery.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, fellow artists and curious makers! If you\u2019ve ever fumbled with a tube of liquid … What is the drying method of solid watercolor paints?<\/span>Read more<\/a><\/p>\n","protected":false},"author":5,"featured_media":520,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[483],"class_list":["post-520","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-solid-watercolor-paints-41e0-74598a"],"_links":{"self":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts\/520","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/comments?post=520"}],"version-history":[{"count":0,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts\/520\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts\/520"}],"wp:attachment":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/media?parent=520"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/categories?post=520"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/tags?post=520"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}