{"id":840,"date":"2026-11-20T16:57:43","date_gmt":"2026-11-20T08:57:43","guid":{"rendered":"http:\/\/www.frasercoastmaintenance.com\/blog\/?p=840"},"modified":"2026-11-20T16:57:43","modified_gmt":"2026-11-20T08:57:43","slug":"are-lpr-cameras-waterproof-45a1-7d30f7","status":"publish","type":"post","link":"http:\/\/www.frasercoastmaintenance.com\/blog\/2026\/11\/20\/are-lpr-cameras-waterproof-45a1-7d30f7\/","title":{"rendered":"Are LPR cameras waterproof?"},"content":{"rendered":"<p>When I first started selling LPR (License Plate Recognition) cameras back in 2012, I\u2019d get the same question at every trade show, every client call, every time I walked a new property manager through our product line: \u201cWill these cameras hold up if they\u2019re outside in the rain?\u201d Back then, our early LPR models were fine for covered parking garages or office building entrances with overhangs\u2014add a little moisture, and the lenses would fog, circuit boards would corrode, and we\u2019d be back at square one replacing units. Over the last 11 years, though, waterproofing for LPR cameras has evolved from a afterthought to a non-negotiable spec for almost every customer we work with, and I\u2019ve learned way more about what makes these cameras truly weatherproof than I ever expected to back when we were still building prototypes in my garage. <a href=\"https:\/\/www.wiiparking.com\/lpr-camera\/\">LPR Camera<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.wiiparking.com\/uploads\/202214527\/small\/high-speed-automatic-rising-arm-vehicle18400695394.jpg\"><\/p>\n<p>Let\u2019s cut through the marketing jargon first. A lot of brands slap an \u201cIP65\u201d sticker on their cameras and call them waterproof, but that\u2019s not enough if you\u2019re installing them on a street pole or a driveway that gets pounded by heavy rain, snow, or even salt spray from winter roads. IP ratings (Ingress Protection) are standardized by the International Electrotechnical Commission, so I always tell customers to look past the number and understand what each level actually means. For LPR cameras, the sweet spot is at minimum IP66, but IP67 or IP68 is where you want to be if you\u2019re working in environments with extreme weather.<\/p>\n<p>I\u2019ve had customers come to me saying they bought a cheaper IP65 LPR camera online, installed it last winter, and now half of them are dead because they\u2019re in a region that gets 30+ inches of annual rain. Here\u2019s why that happens: IP65 means the camera is protected against low-pressure water jets from any direction, and dust can\u2019t get inside. But it doesn\u2019t test for immersion, or for heavy, prolonged rainstorms. A big thunderstorm with 2 inches of rain in an hour? That\u2019s way more pressure than a standard IP65 test, and water will seep through gaps that the manufacturer didn\u2019t seal properly. Early on, I tried selling our first IP65 model to a car dealership client, and they called me three weeks later saying 12 units had failed. I drove out there, climbed up the pole, and saw that the camera housing had a tiny gap around the lens mount\u2014water was getting in, and by the end of a hot, humid summer, it had shorted out the circuit board. That mistake cost us that client for a while, but it taught me exactly where to focus when improving our waterproofing.<\/p>\n<p>So what makes a good LPR camera waterproof? It\u2019s not just slathering silicone around all the parts (though that\u2019s a part of it, done right). First, the housing material matters. A lot of cheaper cameras use thin plastic housings that warp in extreme heat or cold\u2014when that happens, the seals break, and water gets in. Our cameras use die-cast aluminum housings, coated with a powder finish that resists rust, salt, and UV rays. I\u2019ve tested these housings by leaving a unit submerged in a 5-gallon bucket of water for 72 hours straight, then hosing it down with a high-pressure washer at 1,000 PSI (which is way higher than any standard rain or even car wash) and running a full LPR test afterward. No fog, no corrosion, no dropped frames\u2014works like it\u2019s brand new.<\/p>\n<p>Next, the lens seal is non-negotiable. LPR cameras need a clear lens to read license plates from 50+ feet away in any weather, so fog on the inside of the housing is a death sentence for accuracy. A lot of manufacturers use rubber gaskets, but those break down over time in extreme temperatures. We switched to EPDM gaskings, which are resistant to both cold (down to -40\u00b0F) and heat (up to 185\u00b0F)\u2014no cracking, no shrinking, no gaps. We also add a desiccant packet inside the housing when we assemble each camera, which absorbs any moisture that might get trapped during manufacturing. I\u2019ve heard horror stories from other integrators where a camera worked for a week, then fogged up because the desiccant was missing or insufficient. That\u2019s a easy fix, but only if you\u2019re building the camera right from the start.<\/p>\n<p>Then there\u2019s the wiring. LPR cameras have to connect to power and network cables, and those entry points are where most water leaks happen. Cheaper cameras use standard cable glands that don\u2019t create a tight seal around the cable\u2014water will run down the cable and into the housing. We use waterproof cable glands with a rubber boot that fits tightly around the cable, no matter the size, and we also seal the junction box where the cables enter the camera housing with silicone sealant that\u2019s rated for outdoor use. On top of that, we recommend using weatherproof conduit for the cables when installing, especially in areas that flood or get heavy snowmelt. I always tell customers to budget for the conduit\u2014it\u2019s a small extra cost that saves them from having to replace their cameras a year later.<\/p>\n<p>I\u2019ve also learned that waterproofing isn\u2019t a one-size-fits-all. A camera installed in a covered parking garage only needs IP65, because it\u2019s never exposed to direct rain. But a camera on a busy highway interchange? That needs IP67 or IP68, because it\u2019s exposed to constant rain, snow, and salt from road treatments. Last year, we installed IP68 LPR cameras for a municipal parking garage in Buffalo, NY, which gets 90+ inches of snow a year. They\u2019ve been up for two winters now, and only one unit had a minor issue\u2014and that was because an installer nicked the conduit while running the cable, not because of a flaw in the camera itself.<\/p>\n<p>Common myths I hear all the time: \u201cIf it\u2019s waterproof, I can leave it submerged forever.\u201d No, that\u2019s what IP68 is rated for\u2014usually up to 1.5 meters of immersion for 30 minutes, but it\u2019s not designed for permanent submersion. Another one: \u201cCold weather will break a waterproof camera.\u201d Nope, as long as the seals and housing are rated for low temperatures, they work just as well in -20\u00b0F as they do in 90\u00b0F. We did a test last month where we put a new LPR camera in a walk-in freezer set to -30\u00b0F, left it for 48 hours, then brought it back to room temperature and ran license plate tests. It was just as accurate as a brand new unit from the production line.<\/p>\n<p>As a supplier, I also stand behind our waterproof cameras because I test every single one before it leaves our warehouse. We don\u2019t just check the IP rating on the spec sheet\u2014each unit goes through a 24-hour water test: we spray it with a high-pressure water nozzle, submerge it in a bucket, and run a diagnostic test to make sure the circuits are working. No exceptions. I learned early on that cutting corners on testing leads to unhappy customers, and unhappy customers don\u2019t come back. We have a 5-year warranty on all our waterproof LPR cameras, too\u2014if something goes wrong because of a manufacturing defect, we\u2019ll replace it for free, no questions asked.<\/p>\n<p>Now, if you\u2019re in the market for LPR cameras, here\u2019s what I recommend you look for. First, confirm the IP rating, but don\u2019t stop at the number. Ask the supplier for test data: how was the IP rating tested? Did they test for extreme temperatures? What\u2019s the warranty like? Second, ask about the housing material and gaskets\u2014aluminum housings and EPDM gaskets are non-negotiable for outdoor use. Third, ask about the wiring and cable seals\u2014cheap cable glands are one of the most common causes of water damage. Finally, don\u2019t be afraid to ask for references. We always give out references from customers in similar environments\u2014municipalities, car dealerships, parking garages, highways\u2014because nothing tells you a product works like hearing from someone who\u2019s been using it for years.<\/p>\n<p>I see too many customers waste money on cheap LPR cameras that claim to be waterproof, only to have to replace them six months later. Over the last decade, we\u2019ve built hundreds of thousands of waterproof LPR cameras, and I can count on one hand the number of units that have failed because of our own manufacturing mistakes. That\u2019s not luck\u2014it\u2019s attention to detail, and knowing that when a customer installs our camera, it needs to work in every weather condition, every day, no matter what.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.wiiparking.com\/uploads\/202214527\/small\/motorbike-entry-lane-auto-pay-station52313194121.jpg\"><\/p>\n<p>If you\u2019re planning an LPR installation, whether it\u2019s for a small residential driveway, a busy commercial parking lot, or a highway interchange, let\u2019s talk. I can walk you through the specs, show you test data, and even connect you to references in your area who use our cameras. We don\u2019t just sell cameras\u2014we sell solutions that work, and that means making sure every unit is waterproof enough to last for years, no matter the environment. There\u2019s no substitute for on-the-ground testing, and I\u2019ve done enough of that to know that when a customer picks our waterproof LPR cameras, they don\u2019t have to worry about rain, snow, or anything else the weather throws their way.<\/p>\n<p><a href=\"https:\/\/www.wiiparking.com\/pay-on-foot-station\/\">Pay-on-Foot Station<\/a> References<\/p>\n<ol>\n<li>International Electrotechnical Commission. (2021). IEC 60529: Degrees of protection provided by enclosures (IP Code)<\/li>\n<li>National Electrical Manufacturers Association. (2020). NEMA 250: Enclosures for Electrical Equipment<\/li>\n<li>Journal of Sensors and Sensor Systems. (2022). Environmental Durability Testing for Outdoor Intelligent Traffic Systems<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.wiiparking.com\/\">Wiicontrol Information Technology Co., Ltd.<\/a><br \/>Wiicontrol Information Technology Co., Ltd. is one of the leading manufacturers and suppliers focusing on lpr camera in China. Find and buy the high-tech, quality and cheap lpr camera here with our factory. Custom products are also available based on qualified customized orders. Feel free to get the quote with us now.<br \/>Address: #G1-406, 200 Linghu Blv, Xinwu District, Wuxi City, China. 214135<br \/>E-mail: tina.guo@wiicontech.com<br \/>WebSite: <a href=\"https:\/\/www.wiiparking.com\/\">https:\/\/www.wiiparking.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>When I first started selling LPR (License Plate Recognition) cameras back in 2012, I\u2019d get the &hellip; <a title=\"Are LPR cameras waterproof?\" class=\"hm-read-more\" href=\"http:\/\/www.frasercoastmaintenance.com\/blog\/2026\/11\/20\/are-lpr-cameras-waterproof-45a1-7d30f7\/\"><span class=\"screen-reader-text\">Are LPR cameras waterproof?<\/span>Read more<\/a><\/p>\n","protected":false},"author":5,"featured_media":840,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[803],"class_list":["post-840","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-lpr-camera-4d23-7d5f5d"],"_links":{"self":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts\/840","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/comments?post=840"}],"version-history":[{"count":0,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts\/840\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/posts\/840"}],"wp:attachment":[{"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/media?parent=840"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/categories?post=840"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.frasercoastmaintenance.com\/blog\/wp-json\/wp\/v2\/tags?post=840"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}